Roof Anchors, Fall-Arrest Systems, Guardrails & Safety Structures Designed and Reviewed by a Professional Engineer

Need engineering for a roof anchor, fall-arrest anchor point, horizontal lifeline system, guardrail, opening cover, tie-back anchor, or other fall protection component?

When workers are required to perform tasks at height or near hazardous openings, engineering documentation is often required before a system can be installed, approved, or put into service. Missing engineering can delay roofing projects, maintenance work, equipment installations, occupancy approvals, and safety compliance programs.

Sepco Consulting Engineers provides structural engineering, calculations, assessments, site inspections, and P.Eng. stamped drawings for fall protection systems throughout Ontario. We work with contractors, facility owners, property managers, industrial facilities, institutions, and safety professionals to develop practical, code-compliant solutions that help projects move forward safely and efficiently.

Common Projects We Engineer

Roof anchors
Fall-arrest anchor points
Permanent anchor systems
Tie-back anchors
Horizontal lifeline systems
Window cleaning anchors
Davit bases and support structures
Roof guardrails
Industrial guardrails and handrails
Self-closing safety gates
Safety barriers
Maintenance platforms
Access platforms
Catwalks and elevated walkways
Ladder safety systems
Roof access structures
Floor opening covers
Roof hatch covers
Trench covers
Utility vault covers
Pit covers
Traffic-rated steel covers
Anchorage reinforcement systems
Custom fabricated safety structures

Common Challenges We Help Resolve

"We Need a Roof Anchor Before Work Can Begin"

Roofing contractors, maintenance crews, HVAC technicians, and building service personnel often require engineered anchor points before accessing elevated work areas.

We assess the supporting structure, determine the applicable design loads, and provide engineered anchor systems complete with calculations and P.Eng. stamped drawings.

"The Existing Anchors Have No Engineering Documentation"

Many buildings contain anchor points, tie-backs, davits, and lifeline systems that were installed years ago with little or no available engineering documentation.

We review the available information, assess the supporting structure, and provide engineering recommendations regarding the adequacy of the installation or any structural upgrades that may be required.

"We Need Engineering for a Horizontal Lifeline System"

Horizontal lifelines can generate significant forces that must be safely transferred into the building structure during a fall-arrest event.

We evaluate the load path, supporting members, connections, and anchorage requirements to develop a practical and structurally sound support system.

"An Inspector Requested Stamped Drawings"

Building owners, consultants, safety representatives, and regulatory authorities frequently request engineering documentation before approving a fall protection installation.

We prepare the calculations, drawings, and engineering documentation needed to support project requirements and facilitate the review process.

"We Need Guardrails Instead of Personal Fall Protection"

In many situations, properly designed guardrails provide a simpler and more practical solution than harness-based fall protection systems.

We design permanent and retrofit guardrail systems for rooftops, industrial facilities, mechanical equipment areas, elevated walkways, and access platforms.

"An Opening Requires a Protective Cover"

Open pits, floor openings, trenches, roof hatches, utility vaults, and equipment access openings can create serious fall hazards.

We design engineered steel covers and supporting framing systems capable of supporting personnel, maintenance equipment, and vehicle loads where required while protecting workers from accidental falls.

Fall Protection Systems We Commonly Engineer

Anchor Systems

Fall-arrest anchors
Roof anchors
Permanent anchor points
Tie-back anchors
Suspended access anchors
Window cleaning anchors
Davit anchors
Equipment access anchors
Custom anchorage assemblies

Horizontal Lifeline Systems

Horizontal lifeline supports
End anchor assemblies
Intermediate support structures
Rooftop lifeline systems
Lifeline support frames
Structural anchorage systems

Guardrails and Safety Barriers

Roof guardrails
Freestanding guardrails
Mechanically attached guardrails
Industrial guardrails
Handrails
Safety barriers
Self-closing safety gates
Equipment protection barriers

Opening Protection Systems

Floor opening covers
Roof opening covers
Roof hatch covers
Trench covers
Utility vault covers
Pit covers
Removable steel covers
Traffic-rated steel covers
Custom fabricated safety covers

Access and Maintenance Structures

Maintenance platforms
Access platforms
Catwalks
Elevated walkways
Roof access systems
Ladder safety systems
Equipment access structures

Structural Support Systems

Anchor support frames
Steel support structures
Anchorage reinforcement systems
Connection design
Retrofit and strengthening solutions
Custom fabricated safety structures

Our Engineering Services

Depending on project requirements, we can provide:

Structural engineering design
Engineering calculations
P.Eng. stamped drawings
Stamped shop drawings
Existing structure assessments
Structural adequacy reviews
Site inspections
Connection design
Retrofit design
Permit support documentation
Construction review services

Why Clients Choose Sepco Consulting Engineers

Practical Solutions

We focus on designs that are safe, practical to install, and compatible with the existing structure.

Experience With Existing Facilities

Many fall protection projects involve retrofitting existing buildings where structural information may be incomplete. We routinely assess existing steel, concrete, masonry, and wood structures to develop workable solutions.

Direct Access to the Engineer

You communicate directly with the Professional Engineer responsible for the work, allowing technical questions and design issues to be addressed quickly.

Responsive Turnaround

We understand that maintenance, roofing, and construction projects often operate under tight schedules and require timely engineering support.

Clear Engineering Documentation

Our calculations, drawings, and reports clearly communicate the structural requirements of the system and provide a basis for fabrication and installation.

Industries We Serve

Commercial buildings
Industrial facilities
Manufacturing plants
Warehouses
Institutional buildings
Property management companies
Condominium corporations
Schools and universities
Municipal facilities
Roofing contractors
Building maintenance contractors
Window cleaning contractors
Mechanical contractors
General contractors

Need Engineering for a Fall Protection System?

Whether you require engineering for a roof anchor, fall-arrest system, horizontal lifeline, guardrail, opening cover, tie-back anchor, maintenance platform, or other safety-related structure, Sepco Consulting Engineers can provide the engineering review, calculations, and P.Eng. stamped drawings needed to support your project.

Call: 416-672-0202
Email: info@sepcoengineering.com
Online: Contact Form